Our Products
Home
New Equipment
Rollback
Rollback Specs
Composite Sliders
Sliding Rotator
Sliding Rotator Specs
Slider
Slider Specs
Quick Swap
Quick Swap Specs
Fixed Boom
Fixed Boom Specs
Contact Us
Our Products
Home
New Equipment
Rollback
Rollback Specs
Composite Sliders
Sliding Rotator
Sliding Rotator Specs
Slider
Slider Specs
Quick Swap
Quick Swap Specs
Fixed Boom
Fixed Boom Specs
Contact Us
9735S Wrecker
See Diagram Below
Standard Equipment
35 Ton hydraulic wrecker
90" sliding boom
Locks on sliding system
Dual 30,000lbs hydraulic planetary winches
5/8" x 200' steel cable on each drum
Air clutch release on winches
Air cable tensioners
Direct mounted tandem hydraulic pump
Dual 6" bore x 40 5/8" cylinder for power boom elevation
Lock & safety valve on elevation cylinder
Two stage power boom extension
Directional boom sheave
Nylon slide on boom
Dual independent hydraulic rear stiff legs
Removable spades for stiff legs
Lubrication fittings on all moving parts
Dual control
Lights in lever controls
2 Pressure gauges
Heavy duty body 96" wide
Two toolboxes (36 Cubic Ft.)
168" C.A. (From cab to center of rearmost axle)
Hi-tensile steel used for structural parts
Sandblast + Epoxy primer paint
Undercoating underneath the body
Monocoque body
Rear mounted recovery anchors
Safety chains (2 - 3/8" x 15' grade 7)
Federal standard #108 light group
Door checks & hold backs
Air plug (truck must have trailer air system)
Electric plug
Mud flaps
Optional Equipment
Tri-axle body for 52" or 54" spread (26" longer, 194" C.A., small tool boxes)
Reinforcement plate under the cab
Reinforcement plate under the cab & bunk
"L" shape mounting plate 3/8"
"L" shape mounting plate T1 steel 3/8"
Third stage boom
Heavy duty axle-lift + 4 sets of brackets + tie down chains
Super heavy duty axle-lift + 4 sets of forks + tie down chains
Tunnel toolbox 24" or 28" or 32" or 36" or 40" or 44" or 48" single door
Tunnel toolbox 48" or 52" or 56" or 60" or 64" or 68" or 72" double door
Battery box inside the tunnel toolbox
Work lights in toolboxes
Light pylon
Aluminum cover inside the light pylon
Winch covers
Aluminum checker plate on top of tunnel toolbox
Aluminum checker plate on rear steps
2 Work lights under the bumper
Stainless on boom
Stainless on mast
Stainless on light pylon
Stainless on bottom of body
Stainless on winch covers
Stainless on levers control
Stainless on top of body's sides
One-color paint (acrylic enamel)
One-color paint (IMRON)
Installation (includes PTO)
Tow Tech Equipment Ltd.
P. O. Box 505, 150 Main Street
Bath, NB E7J 2N3
506.278.5000 / 888.869.4327