Tow Tech Composite Slider 50CS
See Diagram Below

Standard Equipment

  • 50 Ton hydraulic wrecker
  • 99" sliding boom ; Locks on sliding system
  • Dual 50,000lbs hydraulic planetary winches
  • 7/8" x 200` steel cable on each drum
  • Air clutch release on winches
  • Air cable tensioners
  • Direct mounted tandem hydraulic pump
  • Dual 6-1/2" bore cylinders for power boom elevation
  • Lock & safety valve on elevation and extension cylinders
  • "V" shaped boom
  • Directionnal boom sheave
  • Nylon slide on boom
  • Dual independant hydraulic rear jack legs
  • Removable spades for jack legs
  • Lubrication fittings on all moving parts
  • Dual control
  • LED Lights in levers control ; 2 pressure gauges
  • Composite body 100-5/8'' wide (including fenders)
  • 134CuFt of tool box storage
  • Aluminum pannel with fork holders in big driver side tool box
  • Aluminun pannel with chain hanger in small driver side tool box
  • 2 Curb lights on each side
  • 180" C.A. (from cab to center of rearmost axle)
  • Sandblast & Epoxy primer paint on all steel pieces
  • Modular body
  • Rear mounted recovery anchors
  • Federal standard #108 light group ; Mud flaps
  • Electric plug & Air plug
Optional Equipment
  • 2 Auxiliary 20,000lb winches mounted under the boom
  • "L" shaped mounting plate 3/8"
  • "L" shaped mounting plate T1 steel 3/8"
  • Third stage boom
  • Heavy duty axle-lift
  • Super heavy duty axle-lift
  • Tunnel tool box 24" to 72"
  • Battery box inside the tunnel tool box
  • Work lights in standard tool boxes
  • Work lights in standard & tunnel tool box
  • Light pylon
  • Aluminum cover inside the light pylon
  • Winch covers
  • Aluminum checker plate on top of tunnel tool box
  • Aluminum checker plate on rear steps
  • 2 work lights under the bumper
  • 17 marker light per side instead of 10
  • Rear corner strobes
  • Stainless work light in-between the tires
  • 2 Adjustable aluminum shelves in passenger side small tool box
  • Aluminum pannels in passenger standard tool boxes
  • Wireless remote control
  • Stainless underneath the marker lights
  • Stainless on boom
  • Stainless on mast
  • Stainless on light pylon
  • Stainless on winch covers
  • Paint
  • Installation
Wrecker Specifications
  • Boom basic structural rating fully retracted : 100,000lbs
  • Boom basic structural rating fully extended : 40,000lbs
  • Reach past tailgate (3rd stage) : 290"
  • Maximum Boom working height (3rd stage) : 408"
  • Range of elevation : 0° - 60°
Axle-Lift Specifications
  • H.D. : capacity fully retracted : 35,000lbs ; Reach : 71"
  • H.D. : capacity fully extended : 15,000lbs ; Reach 110"
  • S.H.D. : capacity fully retracted : 50,000lbs ; Reach : 86"
  • S.H.D. : capacity fully extended : 20,000lbs ; Reach 136"
Chassis Specifications
  • Front Axle : 16,000lbs minimum
  • Rear Axle : 40,000lbs minimum
  • C.A. available : from 180" (from cab to center of rearmost axle)
  • Double frame
  • Call NRC for more information

Tow Tech Equipment Ltd.
P. O. Box 505, 150 Main Street
Bath, NB E7J 2N3
506.278.5000 / 888.869.4327